Published at Monday, 21 May 2018. Fish Tank. By rudolf.
When setting up your aquarium try to avoid placing it in direct sunlight, which will cause algae to grow in the tank. Remember it will need to be situated near a power outlet as many items of tank equipment require a power source.
The first step is to thoroughly clean the tank. Dont skip this important step just because the glass of the aquarium looks clean. Use a mild detergent in warm water to scrub out the tank. Rinse out the tank thoroughly to completely remove all traces of debris and detergent. Flush out the cleaned tank several times with fresh water to ensure there are no traces of detergent left behind.
OK time to start. Place the aquarium in its final position, set up all the equipment like lights filter etc. but dont plug anything in yet. Clean the tank with clean water. Do not use soap or chemicals. Wash your Gravel or sand until it runs clear. Mix laterite with about a third of your substrate and spread it over the base of the tank. Add the remainder of the substrate covering the base layer evenly and landscaping it as you want it. Put a plate in the bottom of the tank and add your water pouring gently onto the plate to avoid disturbing the laterite. Add your water conditioner to remove any chlorine.
Any content, trademark’s, or other material that might be found on the newportconsgroup website that is not newportconsgroup’s property remains the copyright of its respective owner/s. In no way does newportconsgroup claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 newportconsgroup. All Rights Reserved.